Flow YOTi II Lite

THE FUN MACHINE lite!

 

 15 / 17 / 19 / 21


Pilots' recommendations

Miniwing for Coastal Soaring and Freestyle

 

About the YOTi II Lite

 

Carrying all the amazing qualities from the Yoti II, the Yoti II Lite is designed to pilots who seek the ultimate ease of use on the ground and agility in the air. Hike and Fly. Strong wind soaring and thermal XC flights, the Yoti II Lite is capable of all.

yoti-lite-1.jpg

As light as 2.15 kgs, the Yoti II Lite is the most versatile glider in Flow PARAGLIDERS' range, the perfect travel companion, with speed and stability on a very stable shark nose profile and a surprisingly efficient glide angle and thermaling abilities. Yoti2 Light is a one glider quiver.

yoti-lite-2.jpgyoti-lite-4.jpg

The small packing volume combined with easy launching characteristics makes a fun wing for the weekend hike & flight or a run to your local hill for a quick flight.

Let your imagination go wild, Yoti II Lite will be the ideal tool to make it real!

 

 

Retail price for the Flow YOTi II :  4 792.00 NZ$* in all sizes, shipping NZ wide included.

Contact us for the best current deals before it's too late!

 

 

TECHNICAL DATA

 

15 17 19 21        
FLAT AREA 15.00 m2 17.00 m2 19.05 m2 21.00 m2
PROJECTED AREA 13.03 m2 14.68 m2 16.59 m2 18.33 m2
FLAT WINGSPAN 8.57 m 9.12 m 9.77 m 10.27 m
PROJECTED SPAN 7.05 m 7.47 m 8,00 m 8.43 m
ASPECT RATIO 5 5 5 5
PROJECTED AR 3.81 3.83 3.86 3.88
MAX CHORD 2.12 2.20 2.37 2.49
NUMBER OF CELLS 37 37 37 37
GLIDER WEIGHT 2.15kg 2.40kg 2.65kg 2.85kg
TAKE-OFF WEIGHT 55-160kg 55-160kg 55-160kg 55-160
CERTIFICATION EN 926-1 Load test EN 926-1 Load test EN 926-1 Load test EN 926-1 Load test

 

 

MATERIALS

 

Upper Surface Dominico 30D MF
Bottom Surface Dominico 30D MF
Profiles Dominico hard 30D
Diagonals Dominico hard 30D
Profile Reinforcement Dominico hard 30D
Top Lines Liros DSL070
Middle Lines Liros PPSL-120/DSL70
Main Lines Liros PPSL160
Brake Lines Liros DFLP 200/32: DSL 70

 

 

SPEED RANGES

 

  15 17 19
105KG V-TRIM/MAX SPEED (KM/H)      50/64 47/60 44/58
85KG V-TRIM/MAX SPEED (KM/H) 47/61 44/58 41/54
65KG V-TRIM/MAX SPEED (KM/H) 44/57         41/54       39/52      

*Data for reference use only, values might vary due to atmospheric pressure and altitude.

 

 

TECHNOLOGY & FEATURES

 

LINE REDUCTION

Line optimisation reflecting drag reduction and ease of use. All lines are colour coded.

SHARK NOSE

Enhanced stability, improved passive safety, better performance and easier launch characteristics are some of the qualities of our Shark Nose Profile.

LIGHT AND DURABLE

Combining the best selection of materials available, we know the Yoti will offer the best relationship between weight and lifetime.

 

 

 

RAISERS

  • yoti-lite-9 raisers.jpg

The Yoti II Lite is built with a combination of both trimmers and a speed system.

 

The Speed System can be used in a situation where the combination of extra speed and glide angle is needed. For example: Gliding past sinking air while on XC or gliding to a faraway LZ after the wind has picked up. Or mostly used to tune the glider behaviour to suit the conditions when ridge soaring of flying down the hill

 

The Trimmers are an important tool and can be used to adjust and tune the behaviour of the glider to suit the day or the flying style.

By default, the Yoti2 Light trim speed is designed with trimmers all the way in. The use of trimmers can only speed up the trim speed. Opening the trimmers will create a semi-reflex on the profile, resulting in the glider to fly faster but with a worse glide angle. The benefit of the semi-reflex is the stability at speed, the glider will become very pitch stable and the resistance against collapses will also improve. With the trimmers open the Yoti2 Light will dive even deeper into turns and if you want to follow the contours of the terrains or carve in skies with sweeping turns, this is the right configuration.

 

Flying with trimmers all the way in, it will cause the glider to fly at its designed trim speed, therefore, improving the sink rate. A classic scenario: ridge soaring in light winds, pulling the trimmers all the way down will help to stay airborne for longer.

 

We recommend all thermic flying to be flown with trimmers on neutral (trimmers all the way in), as it is the most optimal setup in terms of speed/glide/sink rate. For sweet handling, we would recommend opening the trimmers by 10mm only. Fine-tuning the trimmers is where the Yoti2’s secret is at. Play with yours to find the ideal setting or your conditions and wing loading.

 

Due to the combination of both a shark nose and an optimized collapse resistant profile, Yoti’s brake travel is quite long for this type of glider, therefore, there will be plenty of warning before she stalls yet be careful as she is small and usually flown heavily loaded so be cautious when flying her and remember she is a mini wing and treat her with all the respect she deserves so she can keep delivering smiles.

 

The configuration of full open trimmers and full speed bar is where you can get the max speed out the Yoti2 Light but only use in an extreme scenario where you need the extra speed.

 

 

RUCKSACK

 

  •  
  •  
  • 62 litres Rucksack:
  • Weight 700g
  • Two side pockets
  • Top pockets for objects and documents holder
  • Comfortable with waist strap and adjustable chest strap
  • Colours: Dark grey/ Orange

 

 

DELIVERY

 

  • delivery-1delivery-3delivery-2
  •  

The YOTi II is delivered with:

  • 62 L Flow Paragliders Rucksack
  • Speed bar
  • Repair kit
  • Flow Paragliders key ring
  • Stickers

 

COLOURS

Yoti2 New Jazz

JAZZ

Yoti2 New Fire

FIRE

Yoti2 New Ocean

OCEAN

 

 

 

DOWNLOADS

LINE DIAGRAM

LINE CHART

 

 

                                   VIDEOS